Oil Separators Filters

Part No: 92808286

Type: Flat multi-hole flange coalescing separator cartridge

Filter Media: Imported HV Borosilicate Micro Glass Fiber composite coalescing media

Filtration Precision: ≤0.1 μm

Separation Efficiency: ≥99.99%

Residual Oil Carry-over: ≤3 ppm

Max Working Pressure: 0.7–1.3 MPa

Operating Temperature Range: -20℃ ~ 120℃

Initial Pressure Drop: ≤0.02 MPa

Net Weight: 1.42 kg

Dimensions (mm)

Flange Outer Diameter: 176

Cartridge Outer Diameter: 132

Central Inner Hole Diameter: 82

Overall Height: 240

Application Scenarios

Auto repair workshops, small precision mechanical processing, plastic injection molding, electronic assembly lines, packaging factories, laboratory low-oil compressed air supply stations

Product Features

Multi-gradient high-density glass fiber media with large oil mist holding capacity. It resists oil saturation under long-term light & medium continuous loads and maintains stable separation efficiency throughout the full service cycle.

Uniform deep-pleated low-resistance cylindrical structure with ultra-low initial pressure drop. Double-layer fully perforated galvanized anti-static inner & outer support cages, anti-corrosion and resistant to pressure surges. It eliminates static ignition risks in oil mist environments, and filter media will not deform or collapse under long full-load operation.

Supporting high-temperature nitrile gaskets maintain tight sealing under frequent start-stop and sharp temperature changes, effectively preventing oil bypass and excessive residual oil in compressed air.

Product Description

It adopts high-efficiency gradient glass fiber coalescing technology to capture micron-scale lubricant aerosol mixed in compressed air, limiting outlet residual oil content below 3 ppm. Separated lubricant flows back to the compressor main unit via the central scavenge tube for recycling, greatly cutting lubricating oil consumption and extending the overall machine maintenance interval.

It provides comprehensive protection for downstream refrigerated dryers, adsorption dryers, precision pneumatic components and short-distance air pipelines, lowering maintenance expenses of post-treatment purification equipment.