Oil Separators Filters

Part No: 92101153

Filter Media: Imported US HV multi-layer borosilicate micro glass fiber composite coalescing media

Filtration Precision: ≤0.1 μm micro oil mist capture

Separation Efficiency: ≥99.999%

Residual Oil Carry-over at Air Outlet: ≤3 ppm

Standard Service Life: 4000–6000 working hours; shorten to 2800h under dusty heavy-duty workshop environment

Max Working Pressure: 0.7–1.3 MPa

Operating Temperature Range: -20℃ ~ 120℃

Initial Pressure Drop: ≤0.02 MPa

Replacement Alarm Differential Pressure: ≥0.08 MPa

Gross Weight: 5.8 KG

Dimensions (mm)

Flange Outer Diameter: 301 mm

Cartridge Outer Diameter: 276 mm

Central Inner Hole Diameter: 210 mm

Overall Height: 250 mm

Application Scenarios

Electronic assembly workshops, small hardware precision machining, miniature injection molding factories, packaging production lines, decentralized air supply for small factories, laboratory low-oil clean air production

Product Features

Multi-gradient high-density layered glass fiber media with stable oil mist storage capacity, anti-saturation under continuous light & medium loads, stably control residual oil ≤3 ppm throughout full service cycle.

Compact deep-pleated low-resistance cylinder design, slow differential pressure rise under long full-load continuous operation, effectively reduce power consumption of 37–55kW small main unit.

Double-layer thickened galvanized perforated anti-static inner & outer support cages, anti-corrosion and anti-pressure impact; filter media will not deform or collapse under rated airflow, eliminate static ignition risk of oil mist.

Wear-resistant nitrile rubber gasket features excellent high temperature resistance & anti-aging performance, reliable sealing under frequent startup/shutdown and temperature fluctuation, prevent air-oil bypass and excessive oil carry-over faults.

Product Description

It adopts high-efficiency gradient glass fiber coalescing separation technology to capture micron-scale lubricating oil aerosol in medium-low-flow compressed air. Separated lubricant flows back to the compressor main unit via central bottom gravity oil return tube for circulation reuse, greatly reduce oil refilling frequency and extend overall machine maintenance interval.

It fully protects downstream refrigerated dryers, adsorption dryers, precision pneumatic valves and spraying equipment, lower breakdown frequency and maintenance cost of small air post-processing purification system.