Oil Separators Filters

Part No: A10882574

Filter Media: Imported US HV multi-layer borosilicate micro glass fiber composite coalescing media

Filtration Precision: ≤0.1 μm fine oil mist capture

Separation Efficiency: ≥99.999%

Residual Oil Carry-out: ≤3 ppm

Standard Service Life: 4000–6000 working hours; 2800h under dusty heavy workshop

Max Working Pressure: 0.7–1.3 MPa

Operating Temp Range: -10℃ ~ 120℃

Initial Pressure Drop: ≤0.02 MPa

Replacement Alarm Differential Pressure: ≥0.08 MPa

Gross Weight: 5.2 KG

Dimensions (mm)

Flange Outer Diameter: 355mm

Cartridge Outer Diameter: 300mm

Central Inner Hole Diameter: 170mm

Overall Height: 400mm

Application Scenarios

Auto parts precision machining, general machinery foundry, medium injection molding factories, electronic assembly production lines, mine & factory centralized compressed air stations, food packaging low-oil clean air workshops, pharmaceutical clean gas production

Product Features

Multi-gradient high-density glass fiber media with large oil storage capacity, anti-saturation under long-term medium-heavy continuous load, stably control outlet residual oil ≤3 ppm full service cycle.

Deeply pleated low-resistance vertical cylinder design, slow differential pressure rise during long full-load running, effectively reduce power consumption of 90–110kW main unit.

Double-layer thickened galvanized perforated anti-static inner & outer support cages, shock & corrosion resistant; filter media no deformation/collapse under maximum airflow, eliminate static ignition risk of oil mist.Wear-resistant nitrile gasket resists high temperature aging, zero leakage under frequent start-stop & temperature fluctuation, avoid air-oil bypass and excessive oil carry-over failure.

Product Description

It adopts high-efficiency gradient glass fiber coalescing technology to intercept micron-level lubricant oil aerosol in medium-large flow compressed air. Separated oil flows back to compressor main unit via bottom gravity return tube for recycling, greatly cut oil refilling frequency and extend overall maintenance interval.

It fully protects downstream refrigerated dryers, adsorption dryers, heavy-duty precision pneumatic valves and spraying equipment, reduce breakdown frequency and maintenance cost of air post-processing purification system.