Oil Separators Filters

Part No: 3221113204

Filter Media: Imported HV borosilicate micro glass fiber composite coalescing media

Separation Efficiency: ≥99.99%

Residual Oil Carry-over: ≤3 ppm

Standard Service Life: 3500–6000 working hours

Max Working Pressure: 0.7–1.3 MPa

Operating Temperature Range: -20℃ ~ 120℃

Initial Pressure Drop: ≤0.02 MPa

Replacement Alarm Differential Pressure: ≥0.08 MPa

Net Weight: 1.4 kg

Dimensions (mm)

Flange Outer Diameter: 200

Cartridge Outer Diameter: 170

Central Inner Hole Diameter: 75

Overall Height: 135

Application Scenarios

Auto repair workshops, plastic injection molding, electronic assembly lines, small laser cutting equipment, printing & textile factories, small factory central compressed air stations

Product Features

Multi-gradient high-density glass fiber media with stable oil mist holding capacity. Effectively avoids oil saturation under medium continuous loads and maintains ultra-low residual oil output throughout full service cycle.

Short low-profile cylindrical structure with ultra-low initial pressure loss; differential pressure rises slowly during long-term operation to reduce compressor power consumption.

Double-layer fully perforated galvanized anti-static inner & outer support cages, anti-corrosion and shock resistant. Eliminates static ignition risks in oil mist environment, filter media will not deform or collapse under full-load running.

High-temperature nitrile gasket ensures tight sealing under frequent start-stop and temperature fluctuation, preventing oil bypass and excessive oil carry-over.

Product Description

It adopts multi-layer gradient glass fiber coalescing technology to capture micron-scale lubricant aerosol mixed in compressed air, limiting outlet residual oil ≤3ppm. Separated lubricant flows back to compressor host via central return tube for circulation, greatly cutting lubricant consumption and extending machine maintenance interval.

It provides reliable protection for downstream refrigerated dryers, adsorption dryers, precision pneumatic valves and small laser cutting equipment, lowering failure rate and maintenance cost of air post-processing system.