Coalescing Filters

Part No: E30612XA

Core Technical Specifications

Max Residual Oil Content at Outlet: ≤0.01 ppm, meets ISO 8573-1:2010 Class 0 ultra-clean air standard

Filter Media: Deep-pleated multi-layer gradient hydrophobic borosilicate glass fiber composite, outer blue oleophobic anti-re-entrainment foam sleeve, full anti-static treatment

Flow & Dimension Data

Installation Style: Standard push-fit quick lock

Operating Limits

Continuous Operating Temperature: 2°C ~ 80°C

Standard Replacement Cycle: Replace after 4,000 operating hours or 12 months, whichever comes first

Differential Pressure Service Thresholds

Warning Alert: ΔP＞0.045 MPa

Mandatory Shutdown Replacement: ΔP≥0.07 MPa

Initial Differential Pressure: ≤0.016 MPa

Key Product Advantages

Industry-Leading Fine Aerosol Capture for Precision Manufacturing

Installed downstream of X5 general coalescing element, this XA grade polishing cartridge intercepts invisible 0.01μm submicron oil mist that standard coalescers cannot fully separate. The outer blue hydrophobic foam prevents secondary liquid re-entrainment; coalesced oil and moisture drain rapidly to filter bowl, delivering ultra-low residual oil compressed air for high-standard critical processes.

Deep-Pleated Low-DP Media for Energy Saving

Optimized deep-fold glass fiber maximizes effective filtration area, maintaining ultra-stable low pressure drop under 24/7 full-load continuous operation. The saturated differential pressure below 125 mbar drastically cuts air compressor power consumption and long-term operation costs.

Large Oil & Water Holding Capacity Extends Maintenance Cycles

Thick multi-gradient hydrophobic fiber matrix provides massive liquid storage volume, resisting rapid saturation under high-humidity, high-oil workshop environments and reducing frequent replacement labor & spare parts expenses for medium central air compressor stations.

Hydrolysis & Abrasion Resistant Fiber-Free Construction

Oleophobic borosilicate glass fiber paired with stainless steel support mesh eliminates fiber shedding under long-term humid compressed air operation, preventing secondary pipeline contamination to downstream precision equipment and finished goods. Silicon-free variants available for automotive topcoat painting lines.

Working Principle

Pre-cleaned compressed air from X5 coalescer flows outside-in through the filter cartridge:

Micro oil & water aerosols collide and coalesce into large liquid droplets across multi-layer gradient glass fiber media;

Outer blue anti-re-entrainment foam sleeve stops coalesced liquid droplets from being re-carried by high-speed airflow;

Condensed oil and water drain down to the filter bowl by gravity;

Ultra-dry, ultra-low-oil compressed air is delivered to downstream AC carbon filter or precision production equipment.