Oil Separators Filters

Part No: 2906056400

Filter Media: Multi-layer imported HV borosilicate micro glass fiber composite filter material

Separation Efficiency: ≥99.999%

Residual Oil Content in Air Outlet: ≤3 ppm

Standard Service Life: 3500–5200 working hours; 2800 hours under dusty harsh working conditions

Max Working Pressure: 0.7–1.3 MPa

Operating Temperature: -10℃ ~ 100℃

Initial Pressure Drop: ≤0.02 MPa

Replacement Differential Pressure Alarm Value: ≥0.08 MPa

Flange Outer Diameter: 595 mm

Cartridge Outer Diameter: 460 mm

Central Inner Hole Diameter: 260 mm

Total Height: 280 mm

Application Scenarios

Auto parts precision machining, general machinery foundry, medium injection molding plants, electronic assembly lines, centralized air supply stations for factories and mines, food packaging low-oil clean air production

Product Features

All-in-one maintenance package, including separator core and complete fluorine rubber sealing parts, no extra purchase of gaskets during maintenance.

Oversized multi-gradient high-density glass fiber media with strong oil mist storage capacity, not easy to saturate under long-term heavy load, stably control air residual oil below 3 ppm throughout the service cycle.

Short deep-pleated low-resistance cylinder design, slow pressure drop rise under long full-load operation, effectively reduce power consumption of 90–110kW main unit.

Double-layer thickened galvanized perforated anti-static inner and outer support mesh, anti-corrosion and anti-pressure impact; filter media will not collapse and deform under full air flow, eliminating static ignition risk of oil mist.

Fluorine rubber gasket features high temperature resistance and anti-aging performance, stable sealing under frequent start-stop and temperature changes, avoiding oil bypass and high oil carry-over failures.

Product Description

This kit adopts high-efficiency gradient glass fiber coalescence separation technology to capture micron-level lubricating oil aerosol in medium-flow compressed air. The separated lubricating oil flows back to the compressor host through the central gravity oil return pipe at the bottom for recycling, greatly reducing oil adding frequency and extending the overall machine maintenance cycle.

It fully protects downstream refrigerated dryers, adsorption dryers, precision pneumatic valves and spraying equipment, lowering failure rate and maintenance cost of air post-processing purification system. The complete supporting fluorine rubber sealing set ensures zero leakage after one-time replacement.