Oil Separators Filters

Part No: 2906056400

Filter Media: Imported German HV multi-layer borosilicate micro glass fiber composite media

Separation Efficiency: ≥99.999%

Residual Oil Carry-over: ≤3 ppm

Standard Service Life: 3500–5200 working hours

Max Working Pressure: 0.7–1.3 MPa

Operating Temperature Range: -10℃ ~ 100℃

Initial Pressure Drop: ≤0.02 MPa

Replacement Alarm Differential Pressure: ≥0.08 MPa

Flange Outer Diameter: 595 mm

Cartridge Outer Diameter: 460 mm

Central Inner Hole Diameter: 260 mm

Overall Height: 280 mm

Application Scenarios

Automotive parts precision machining, general machinery foundry, medium injection molding factories, electronic assembly production lines, mine & factory centralized compressed air stations, food packaging low-oil clean air production workshops

Product Features

Complete one-stop maintenance package integrating separator core and full fluorine rubber sealing set, no separate gasket procurement required during overhaul.

Oversized multi-gradient high-density glass fiber media with massive oil mist storage capacity, anti-saturation under long-term continuous heavy loads, stably control residual oil ≤3 ppm through the whole service cycle.

Deeply pleated low-resistance short cylinder design, slow differential pressure rise under long full-load continuous operation, effectively reduce power consumption of 90–110kW main unit.

Double-layer thickened galvanized perforated anti-static inner & outer support cages, anti-corrosion and anti-pressure impact; filter media will not deform or collapse under maximum airflow, eliminate static ignition risk of oil mist.

Fluorine rubber gasket features outstanding high temperature resistance & anti-aging performance, reliable sealing under frequent startup/shutdown and temperature fluctuation, prevent air-oil bypass and excessive oil carry-over faults.

Product Description

This kit adopts high-efficiency gradient glass fiber coalescing separation technology to capture micron-scale lubricating oil aerosol in medium-large flow compressed air. Separated lubricant flows back to the compressor main unit via central bottom gravity oil return tube for circulation reuse, greatly reduce oil refilling frequency and extend overall machine maintenance cycle.

It fully protects downstream refrigerated dryers, adsorption dryers, precision pneumatic valves and industrial spraying equipment, lower breakdown frequency and maintenance cost of air post-treatment purification system. The matched full fluorine rubber sealing set ensures zero leakage after one-time replacement.