Oil Separators Filters

Part No: 2903775300

Filter Media: Imported multi-layer HV borosilicate micro glass fiber coalescing composite media

Filtration Precision: ≤0.1 μm fine oil mist capture

Separation Efficiency: ≥99.999%

Residual Oil Content at Air Outlet: ≤3 ppm

Standard Service Life: 3500–4000 working hours

Max Working Pressure: 20 bar

Operating Temperature Range: -20℃ ~ 120℃

Initial Pressure Drop: ≤0.02 MPa

Bottom Thread Standard: M32×1.5 standard 

Gross Weight: 1.35 KG

Application Scenarios

Auto parts precision machining, medium injection molding plants, electronic component assembly lines, factory centralized compressed air stations, food packaging workshops, laser cutting & automotive painting production lines

Product Features

Multi-gradient high-density glass fiber media with large oil holding capacity, anti-saturation under medium continuous load, residual oil stably controlled ≤3 ppm throughout full service cycle.

Thickened heavy-duty anti-rust metal shell, shock & corrosion resistant; filter media will not deform under medium airflow, eliminate static ignition risk of oil mist.Fluorine seal withstand high temperature & aging, zero leakage under frequent start-stop and temperature fluctuation to avoid air-oil bypass and excessive oil carry-over.

Product Description

It adopts high-efficiency gradient glass fiber coalescing technology to capture micron-scale lubricant oil aerosol mixed in medium-flow compressed air. Separated lubricant flows back to airend via built-in return channel for cyclic reuse, greatly reduce oil refilling frequency and extend whole machine maintenance cycle.

It fully protects downstream refrigerated dryers, adsorption dryers, precision pneumatic valves, laser cutting heads and spray guns, lower failure rate & maintenance cost of post-air-treatment purification systems.