Oil Separators Filters

Part No: 2205615622

Filter Media: Imported HV Borosilicate Micro Glass Fiber composite coalescing media

Separation Efficiency: ≥99.99%

Residual Oil Carry-over: ≤3 ppm

Standard Service Life: 3500–6000 working hours

Max Working Pressure: 0.7–1.3 MPa

Operating Temperature Range: -20℃ ~ 120℃

Initial Pressure Drop: ≤0.02 MPa

Replacement Alarm Differential Pressure: ≥0.08 MPa

Net Weight: 1.1 kg

Dimensions (mm)

Outer Diameter: 140

Overall Height: 230

Application Scenarios

Auto repair workshops, small precision mechanical processing, plastic injection molding, electronic assembly lines, packaging factories, small factory central compressed air supply stations

Product Features

Multi-gradient high-density glass fiber filter media with stable oil mist holding capacity. It resists oil saturation under long-term light & medium continuous loads and maintains ultra-low residual oil output throughout the full service cycle.

Reinforced galvanized steel shell with full-perforated anti-static inner support mesh, anti-corrosion and shock-resistant. It eliminates static ignition risks inside oil mist environment, filter media will not deform or collapse under long full-load running.

Integrated nitrile rubber gasket provides leak-free sealing under frequent start-stop and temperature fluctuation, avoiding oil bypass and excessive oil carry-over into clean compressed air.

Each separator is fully tested for coalescing efficiency, burst pressure and airflow pressure drop before shipment to guarantee consistent stable performance.

Product Description

It adopts high-efficiency gradient glass fiber coalescing separation technology to capture micron-scale lubricant aerosol mixed in compressed air, limiting outlet residual oil content below 3 ppm. Separated lubricant flows back to compressor main unit through built-in bottom oil return channel for recycling, greatly cutting lubricating oil consumption and extending machine maintenance interval.

It provides reliable protection for downstream refrigerated dryers, adsorption dryers, small precision pneumatic components and short-distance air pipelines, lowering failure rate and maintenance cost of post-processing purification equipment.