Oil Filters

Part No: 1622035101

Filter Media: Imported multi-layer HV borosilicate micro glass fiber composite coalescing media

Filtration Precision: ≤0.1 μm fine oil mist interception

Separation Efficiency: ≥99.999%

Residual Oil Content at Air Outlet: ≤3 ppm

Standard Service Life: 4000 working hours

Max Working Pressure: 0.7–1.3 MPa

Operating Temperature Range: -20℃ ~ 120℃

Initial Pressure Drop: ≤0.02 MPa

Replacement Alarm Differential Pressure: ≥0.08 MPa

Gross Weight:2.3 KG

Application Scenarios

Electronic component assembly, small hardware workshops, laboratory air supply, laser cutting equipment, food small packaging lines, decentralized compressed air stations for small factories

Product Features

Multi-gradient high-density glass fiber media with stable oil storage capacity, anti-saturation under light continuous loads, stable residual oil ≤3 ppm for full service cycle.

Integral anti-static metal outer shell, shock and corrosion resistant; filter media will not deform under low-medium airflow, eliminating static ignition risks of oil mist.

Fluorine rubber seal resists high temperature & aging, zero leakage under frequent startup/shutdown and temperature fluctuation to avoid air-oil bypass and excessive oil carry-over.

Product Description

It adopts high-efficiency gradient glass fiber coalescing technology to capture micron-scale lubricating oil aerosol mixed in low-flow compressed air. Separated lubricant flows back to airend via built-in return channel for cyclic reuse, greatly cutting oil refilling frequency and extending whole machine maintenance interval.

It fully protects downstream small refrigerated dryers, precision pneumatic valves, laser cutting heads and spray guns, reducing failure rate and maintenance cost of small post-air-treatment purification systems.