Other Compressor Parts

Model: 2901990564

Applicable Model: GA160VSD+ 

Type: Oil Separator Maintenance Kit

Recommended Replacement Interval: 4000 hours 

Core Included Components

Oil Separator Core: Key component separating lubricant from compressed air, residual oil content ≤3ppm.

Oil Separator Vessel Seals / O-rings: Complete sealing set to prevent leakage after installation.

Fasteners & Gaskets: Auxiliary mounting accessories.

Functions & Failure Consequences

Functions

Separate lubricant in compressed air, reduce oil content and protect downstream equipment including dryers and filters.

Cut lubricant consumption and operational costs.

Stabilize system pressure and improve energy efficiency.

Failure Consequences

Excessive oil discharge contaminates pipelines and gas-using equipment.

Abnormally high oil consumption raises costs.

Excessive pressure differential increases main unit load and power consumption.

Risks of alternative parts: Poor separation efficiency, excessive oil content, high pressure differential and short service life, voiding equipment warranty.

Maintenance Recommendations

Check pressure differential every 4000 hours, replace immediately if out of limit; mandatory replacement at 5000 hours per factory standard.

Synchronous maintenance: Inspect or replace oil filter, air filter and lubricant together to keep system clean.

Installation tips: Replace all seals thoroughly and clean inner wall of separator vessel to avoid leakage and clogging caused by residual impurities.