Oil Separators Filters

Part No: 92062132

Filter Media: Imported HV / Lydall multi-layer borosilicate micro glass fiber composite media

Separation Efficiency: ≥99.999%

Standard Service Life: 3500–5200 working hours

Max Working Pressure: 0.7–1.3 MPa

Operating Temperature Range: -20℃ ~ 120℃

Initial Pressure Drop: ≤0.02 MPa

Replacement Alarm Differential Pressure: ≥0.08 MPa

Dimensions (mm)

Flange Outer Diameter: 480mm

Cartridge Outer Diameter: 435mm

Central Inner Hole Diameter: 310mm

Overall Height: 620mm

Application Scenarios

Mining open-air operation, road & bridge engineering, tunnel construction, oil & gas field, shipyard mobile air supply, remote construction site temporary air station

Product Features

Multi-gradient high-density glass fiber media with huge oil mist storage capacity, anti-saturation under long continuous heavy load, stably control residual oil ≤3 ppm full service cycle.

Extra tall deep-pleated low-resistance cylinder, slow differential pressure rise during long full-load running, effectively reduce fuel consumption of mobile compressor host.

Double-layer thickened perforated galvanized anti-static inner & outer support cages, anti-corrosion & anti-pressure surge; filter media no deformation/collapse under bumpy mobile working conditions, eliminate static ignition risk of oil mist.

Integrated one-piece flange with wear-resistant rubber gasket, shock-resistant sealing for frequent vibration of mobile equipment, avoid oil bypass and excessive oil carry-over failure.

Product Description

It adopts high-efficiency gradient glass fiber coalescing separation technology to intercept micron-level lubricant oil aerosol in high-flow compressed air. Separated lubricant flows back to compressor main unit via bottom central gravity oil return tube for recycling, greatly cut lubricating oil consumption and extend overall machine maintenance interval.

It fully protects downstream post-processing drying & filtering equipment, pneumatic rock drill, sand blasting, pipeline pressure test equipment, lower breakdown frequency and maintenance cost of mobile air supply system.