Fluidguard Machinery Equipment Co., Ltd. amy@aida-machinery.com
Call Us : 0086-15137376132
Model : 4930255271
Type : Oil Separators Filters
Replacement for : mann
Outer Diameter : 170 mm
Outer Diameter 1 : 200 mm
Height : 305 mm
Included accessories : Gasket
Air/Oil Separator Element for oil separation applications. Specifications: Outer Diameter 170 mm; Outer Diameter 1 200 mm; Height 305 mm; Included accessories: Gasket.
Part numbers marked "replacement" are not affiliated with the original manufacture.
The 4930255271 Air/Oil Separator Element is a replacement component designed for compressed-air and lubricated screw-compressor systems that use an air/oil separation stage. Its main purpose is to support the separation of oil from the compressed-air stream inside the separator vessel. During normal operation, the separator element works as part of the compressor’s internal separation system: the air and oil mixture enters the vessel, the element helps retain separated oil, and the cleaned air continues through the air outlet while recovered oil is returned to the lubrication circuit according to the equipment design. This product is supplied as an element only and should be selected by matching the part number, dimensions, connection arrangement, sealing condition, and equipment requirements before installation.
The element has a reported outer diameter of 170 mm, an outer diameter 1 of 200 mm, and a height of 305 mm. A gasket is included as an accessory. These dimensions are provided to support preliminary identification and purchasing review. Before ordering, users should compare the existing element, housing, cover, sealing surface, and service documentation because dimensions alone may not confirm complete compatibility. Correct installation and maintenance should always follow the instructions for the compressor system in which the element will be used.
Product Features
1. Air/oil separation function: The element is intended for the separation stage of a lubricated compressed-air system. Its internal filter media and structural components provide a controlled path for the air/oil mixture inside the separator vessel. The element should be used only for the service and equipment configuration for which it has been verified.
2. Replacement-part format: The product is supplied as a replacement air/oil separator element rather than a complete separator vessel or compressor assembly. This format can help maintenance teams replace the service component while retaining the existing vessel and associated equipment when those parts remain suitable for continued use.
3. Identifiable dimensions: The reported dimensions are 170 mm outer diameter, 200 mm outer diameter 1, and 305 mm height. These measurements can be used together with the part number and the original component for a pre-order dimensional check.
4. Gasket accessory: A gasket is included. The gasket should be inspected before installation and positioned correctly on the prepared sealing surface. The old gasket should not be reused when the service procedure or equipment instructions require replacement.
5. Serviceable construction: As an internal separator element, the product is designed for installation during scheduled compressor maintenance. The element should be handled carefully to avoid deformation, contamination, or damage to its sealing surfaces before it is installed.
6. Clear model identification: The model reference 4930255271 is used to distinguish this separator element from other products with similar appearance or related dimensions. Buyers should keep the model reference in purchase records, maintenance records, and replacement planning documents.
Product Applications
The 4930255271 element can be considered for maintenance and replacement work on lubricated screw-compressor systems when the existing part has been identified as the same model or has been confirmed as dimensionally and functionally compatible. Typical use cases include routine service, replacement after inspection, preparation of a spare-parts inventory, and restoration of the separation stage when the installed element has reached the end of its service interval according to the equipment maintenance plan.
It may be relevant to compressed-air installations used in workshops, manufacturing areas, processing facilities, utility rooms, and other industrial environments where a lubricated compressor supplies compressed air. The actual application depends on the compressor design, separator vessel, operating conditions, oil circuit, air demand, and maintenance instructions. For this reason, the product should not be treated as a universal fit for every compressor. Users should verify the part number and dimensions, and where necessary provide a clear image or measurements of the original element before purchase.
For maintenance teams, the element can also be used as a planned spare. Keeping a correctly identified replacement available may help organize service work, reduce waiting time during scheduled maintenance, and support consistent replacement procedures. Storage should be clean and dry, with the element protected from impact, moisture, dust, and deformation until it is needed.