Coalescing Filters

Part No: 2901019400

Core Technical Specifications

Absolute Filtration Precision: Solid particles ≥0.1 μm, liquid oil/water aerosols ≥0.1 μm

Filter Media Structure: Multi-layer deep-pleated gradient borosilicate glass fiber composite, outer cyan oleophobic anti-static hydrophobic foam sleeve to prevent liquid re-entrainment

Overall Dimension: Length 410 mm, Outer Diameter 100 mm, Net Weight 630 g

Operating Limits

Max Working Pressure: 1.6 MPa

Continuous Operating Temperature: 3°C ~ 66°C

Standard Replacement Interval

4,000 operating hours under clean industrial conditions; shorten to 2,500–3,000 hours in high-humidity, dusty workshops. Replace once differential pressure hits alarm threshold.

Differential Pressure Replacement Thresholds

Initial pressure drop of new element: ≤0.012 MPa

Mandatory replacement alarm trigger point: ΔP ≥ 0.06 MPa

Sealing & Support Construction

End Caps: Corrosion-resistant black PA polyamide locking end cap with integrated flow diversion ribs

Seal System: Integrated full-circle NBR nitrile rubber gasket, zero air bypass leakage, resistant to compressor oil and acidic condensate aging

Inner & Outer Support Cage: Double-layer perforated 304 stainless steel mesh, anti-collapse under full rated medium-volume continuous airflow

Key Product Advantages

It drastically reduces liquid contamination load on terminal ultrafine and carbon cartridges, extends their service life and cuts factory spare parts & maintenance expenses.

Extra-large oil & liquid holding capacity for stable long-cycle continuous operation

Thick deep-pleated gradient glass fiber matrix provides massive liquid retention volume. It resists rapid pressure rise in humid production workshops with underperforming aftercoolers or refrigerated dryers, minimizing unplanned production downtime from frequent filter swaps.

Heat-stabilized integrated media, zero fiber shedding to avoid secondary pipeline contamination

Heat-cured solidified glass fiber composite paired with double-layer stainless steel support mesh prevents fiber powder detachment under long-term medium-volume airflow impact. No glass fiber debris will block spray guns, laser optical lenses and industrial miniature pneumatic control valves.

Ultra-low permanent differential pressure to reduce air compressor energy consumption

Uniform gradient pore layout minimizes airflow resistance throughout the full service lifespan. Stable low backpressure cuts continuous power draw of medium screw air compressors and lowers long-term factory electricity costs.