Air Filters

Part No: PDP130+

Filtration Accuracy: 0.01 μm, captures fine solid dust, rust and particulate contaminants

Residual solid particle size: ≤0.01 μm

Nominal flow rate: 130 m³/h @ 0.7 MPa

Max Working Pressure: 16 bar

Working Temperature: ‑10℃ ~ +65 ℃

Service Life: 6000‑8000 hours under normal dry‑air conditions. Replace when differential pressure reaches 0.05 MPa.

Main Features

PDP130+ dry‑particulate element purifies dry compressed air by capturing ultra‑fine solid dust and rust particles. It cannot remove oil mist or condensate water; liquid contamination will cause rapid clogging

Replace upon high differential pressure or particle carry‑over to avoid downstream pipeline contamination.

Application Industries

Compressor post‑treatment, painting, electronics, precision pneumatic instruments, general‑manufacturing and laboratory dry‑air purification systems.