Coalescing Filters

Part No: 2258293705

Core Technical Specifications

Filtration Grade: FD Ultrafine Submicron Oil Mist Deep Removal Grade

Absolute Filtration Precision: Solid & liquid oil/water aerosols ≥0.01 μm

Filter Media Structure: Multi-layer deep-pleated gradient borosilicate micro glass fiber composite, fitted with outer red anti-static hydrophobic & oleophobic foam sleeve to eliminate liquid re-entrainment

Housing & Flow Parameters

Compatible Housing: Ceccato FD-5 precision inline compressed air filter

Mounting Type: Central threaded mandrel twist-lock quick connection

Operating Limits

Max Working Pressure: 1.6 MPa

Continuous Operating Temperature: 3°C ~ 66°C

Standard Replacement Interval

4,000 operating hours under clean industrial conditions; shorten to 2,500–3,000 hours in high-humidity & dusty environments. Replace immediately once differential pressure hits alarm threshold.

Differential Pressure Replacement Thresholds

Initial pressure drop of new element: ≤0.014 MPa

Mandatory replacement alarm point: ΔP ≥ 0.07 MPa

Sealing & Support Construction

End Caps: Corrosion-resistant black PA polyamide locking end cap with integrated flow diversion ribs

Seal: Integrated full-circle NBR nitrile rubber gasket, zero air bypass leakage, resistant to compressor oil and acidic condensate aging

Key Product Advantages

It drastically reduces oil contamination load on terminal FV activated carbon cartridges, extends carbon service life and cuts overall factory spare parts & maintenance costs.

Extra-large oil & liquid holding capacity for stable long-cycle continuous operation

Thick deep-pleated gradient micro glass fiber matrix provides massive dirt & liquid retention volume. It resists rapid pressure rise in high-humidity workshops with underperforming aftercoolers or refrigerated dryers, minimizing unplanned production downtime caused by frequent filter replacement.

Heat-stabilized integrated media, zero fiber shedding to avoid secondary pipeline contamination

Heat-cured solidified microfiber composite combined with double-layer stainless steel support mesh prevents fiber powder detachment under long-term small-flow airflow impact. No glass fiber debris will block spray guns, laser optical lenses and miniature pneumatic control valves.

Ultra-low permanent differential pressure to reduce air compressor energy consumption

Uniform gradient pore distribution minimizes airflow resistance throughout the full service lifespan. Stable low backpressure reduces continuous power draw of small screw air compressors and lowers long-term factory electricity expenses.